Jump to content



Photo
- - - - -

[tutorial] YeTi's SA Coding Tutorial Part One


  • Please log in to reply
6 replies to this topic

#1 Oskar

Oskar

    y halo thar owlz!

  • Banned
  • 1,440 posts
  • Poland 

Posted 19 April 2006 - 07:42 PM

Again, I am only representing. ALL CREDITS GO TO YeTi!

YeTi's n00b San Andreas Coding Tutorial

I have decided to write a coding tutorial for San Andreas mainly because there aren’t many out there and the ones that are out there don’t explain the code very well. I hope to clear that up in this tutorial. I would just like to point out I have mainly edited my original Vice City coding tutorial so some buts of it might not make sense if you can just point them out I will correct the mistake.

The Tools.

Just click the tool name to download.

I've uploaded BW's San Andreas Mission Builder 0.33 and San Andreas Place Manager onto my site because in this tutorial I will be using the versions on my site and it will be easier to understand using these versions.

Barton Waterduck's San Andreas Mission Builder 0.33.
San Andreas Place Manager.
San Andreas (1.0)
Notepad ( is sometimes handy.)

Aim.
What I aim to teach you in this tutorial is how to:

Place Pickups (bribes, health etc.)
How To Understand How The Basic Code.

Step 1, backup.

Right now you have downloaded all of the required tools I strongly recommend that you back up a couple of files. The files I suggest you back up are:

main.scm
script.img
default.ide
peds.ide
vehicles.ide

If you used the default San Andreas install directory it will be:

C:\Program Files\Rockstar Games\Grand Theft Auto San Andreas\data

Now default.ide peds.ide vehicles.ide can all be found in here by scrolling down the page.

But main.scm and script.img will be in a separate folder in the data directory called “script”.

C:\Program Files\Rockstar Games\Grand Theft Auto San Andreas\data\script

if you have installed San Andreas somewhere different just follow the directory’s from Grand Theft Auto San Andreas.

Create a folder in My Documents called “Original San Andreas Files”. Now copy all of the listed files into there. Now remember where that is because if you f*ck a file up you will be glad you have made the backup it will save you from having to reinstall the game.

Step 2,Configuring San Andreas Mission Builder 0.33

Before we can use San Andreas Mission Builder 0.33 we need to configure it a bit and set it up ready for use.

Firstly download San Andreas Mission Builder 0.33 then unzip it into My Documents. I suggest renaming it to San Andreas Mission Builder 0.33 but it is not required it just makes things easier to understand.

Now you have unzipped it the first thing we will do is configure a file called SASCM.INI It will be in the newly unzipped folder. Open it with notepad. To do this right click it then select Open With then in the window that pops up select notepad. Now scroll right down to the bottom of the file and press enter to start a new line. Now copy and paste this into the new line:

0A4A=2,%1h% %2h%
0A4B=0,
Then save and exit the file.

Now we need to copy and paste a few files into the San Andreas Mission Builder 0.33 go into your San Andreas data folder:

C:\Program Files\Rockstar Games\Grand Theft Auto San Andreas\data

And copy the following files into San Andreas Mission Builder 0.33’s folder:

default.ide
peds.ide
vehicles.ide

Now while we are in the data folder we also need to copy and paste another folder that is in there. Look for a folder called “script”. You guessed it copy and paste that into San Andreas Mission Builder 0.33’s folder.

That’s all the configuring done.

Step 3 Decompiling The Mission Script
Now this is a little more complicated than in previous versions of Mission Builders.

Firstly run SABuilder03.exe which can be found in the San Andreas Mission Builder 0.33’s folder. Wait for it to load and then select File in the top left corner of the program. Select Open File from the list that drops down.

Now you are greeted with an Open File window this involves a little explaining on how to open the file correctly so here I go.

First of all in the bottom left corner of the Open File window you should see a drop down box which allows you to select a file type to open at the minute it should be set to:

Text Document (*.txt)

Just click the little downward facing arrow and select:

All Files (*.*)

From the list. Now you need to look at the window on he right you’ll see a folder directory listing and on the left a file directory listing. Now we want to open the file main.scm so select the folder script from the folder directory. This will now update the file directory with the latest files available in that folder. As you can see there are two files:

main.scm and
script.img

Select main.scm and click Ok.

Now a new window pops up.

user posted image

Look towards the bottom of the new window and you will see the text <new folder> click here delete any text in the text box and type

Original SCM

Make sure the folder directory is selected on San Andreas Mission Builder 0.33 and click Create Folder.

Now you’ll notice that a new folder has been added called Original SCM. Select this in the folder directory and click Ok.

This will now begin decompiling the main.scm file. Don’t worry about the time it takes it does take a long time to complete and it may even go white as though it has crashed but do not worry it has not just leave it and when it is done it will display a little report. Just click ok on this report and close San Andreas Mission Builder 0.33.

Step 4 Pickups

Right so we will start with pickups as you know a pickup is bribes, health etc.

First we will find and open our decompiled mission script. Go into My Documents and open the San Andreas Mission Builder 0.33 folder scroll down and look for a folder called Original SCM. Open it. When you do you will see a folder called Tables and a text file called Main. Leave the Tables folder alone (it contains files that are required to recompile you’re main.scm file when you have added your code) but the file Main is a decompiled main.scm. So open it in any word processing program.

Right so now we will find the code for creating pickups and edit it to place our own pickups in-game. Click Edit then scroll down and click Find and type in bribe. It should highlight the word bribe in this sentence:
DEFINE OBJECT BRIBE
This is not what you want so click find next. It should highlight this line now:
0213: $3345 = create_pickup #BRIBE type  15 at  2743.0  1316.0  8.0
This is the right code.

Right so now I will explain each of the bits of this code:
0213:
bhis bit is called and opcode. Basically an opcode is a name type. 0213: is a unique code name for the bribe pickup. Every thing has got a unique opcode. There should be a full list of opcodes in San Andreas Mission Builder 0.33’s folder.
$3345
This is basically just a name that rockstar has given to that line of code.
=create_pickup
This is what the code does it is creating pickup.
#BRIBE
This is what pickup the code is creating it is creating a bribe pickup.
type 15
This is just if the code makes the pickup free or not I THINK that 15 is free and 1 is not free so:
type 15
Should be a free pickup and
type 1
Should be a buyable pickup.
at  2743.0  1316.0  8.0
Is the position in the game

2743.0 is the x position in the game
1316.0 is the y position in the game
8.0 is the z position in the game.

Right so that is all of that code explained I hope you understood it?

Now let’s put our own bribe pickup in the game ok?

Copy all of the code line and then just add a new line underneath the original code (you can do this by pressing enter but make sure that none of the code is highlighted), then paste your copied code into your newly created space. It should just fill in the line and not add another but it sometimes does if it does just go to the end of your added line and press delete.

Right so now let’s edit our code.

You need to leave the opcode as it is because as I said before it’s unique to pickups and is needed in the game.

$3345 =
This bit we will change as I said before it is the name that rockstar has given to this line of code so lets give our new line of code its own name. Let’s call it
$mybribe1=
Ok you need to leave the $ sign in front of the name.

So now our code should look like this,
0213: $mybribe1 = create_pickup #BRIBE type  15 at  2743.0  1316.0  8.0
You need to leave
create_pickup #BRIBE type  15
This bit as it is because if you remember it is telling the game to create a bribe pickup and make it free.

But this bit we will alter,
at  2743.0  1316.0  8.0

If you remember this is the position in the game so because we are adding our own pickup we don’t want it in the same place as the proper one do we?

No of course not.

This is were SA Place Manager comes in handy. Load it up and you should be greeted with a screen like this:
Posted Image

Now load up San Andreas with SA Place Manager running in the background. Roam around SA until you get to the required location. I chose here:
Posted Image
Then ALT+TAB out of the game and in SA Place Manager click add place. You will then be greeted with this window.
Posted Image
You then need to click “Click here to insert your current in-game location”. That will then import your location like this:
Posted Image
Now as you can see me co-ordinates are 2510.345 -1687.322 13.57044.

So my code would be
0213: $mybribe1 = create_pickup #BRIBE type  15 at  2510.345 -1687.322 13.57044
Now your own added code should look like mine if you used my coordinates if not then the same but with different coordinates.

Now we make sure the code is inserted correctly. We now need to test it. This will require recompiling the main.scm.

To do this you need to open the main txt file. Then you click Run then Compile wait for it to finish. Then go into the Original SCM folder and copy main.scm and script.img. You then go into the directory and paste them over their originals in the script folder. Now go in-game and test.

Remember to start a new game. You have to start a new game after every bit of editing in the main.scm file.
Posted Image
Now as you can see it’s good.

That’s it for this tutorial I have covered what I said I would I may write more later if I get bored.

Please don’t flame me for this I know some bits are crap and there is likely spelling mistakes I have admitted that so please no flaming.

Related Links:
YeTi's VC coding tutorial part one.

YeTi's VC coding tutorial part two.

YeTi's SA coding tutorial part two.

Full topic.

Edited by chris82, 20 April 2006 - 04:22 PM.


#2 Slayer

Slayer

    You live only once

  • Elite Members
  • 2,287 posts
  • Croatia 

Posted 20 April 2006 - 11:58 AM

That's some amazing tutorial! Explained me basics of coding. Hope this'll result in more coders on this site. Because whenever someone needs a modding team, all he gets is texturers. Everyone needs coders.

Request for pinnage.
<img src="http://img403.images.../cobsignv2.jpg" border="0" class="linked-sig-image" />
<div align="right"><img src="http://img257.images.../pervetnq6.jpg" border="0" class="linked-sig-image" /></div>
+5

#3 chris82

chris82

    Modding King

  • Elite Members
  • 2,917 posts

Posted 20 April 2006 - 04:24 PM

######.

No poll though. You don't need one on a tutorial topic.


Posted Image
Posted Image
Summary of TGTAP
This signature does not display correctly on Internet Explorer 6 or lower.


#4 dutchkillar

dutchkillar

    Vandal

  • Members
  • Pip
  • 24 posts

Posted 01 October 2006 - 08:47 PM

the download doesnt work
¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ ¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ ¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ ¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ ¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ ¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ ¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸ ¸,ø¤º°`°¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸º¸,ø¤º°

#5 Oskar

Oskar

    y halo thar owlz!

  • Banned
  • 1,440 posts
  • Poland 

Posted 10 October 2006 - 06:50 PM

The mod should be in the The Gta Place's download section. If not, contact me through PM.

#6 Mike:)

Mike:)

    Pickpocket

  • Members
  • Pip
  • 28 posts

Posted 02 May 2007 - 04:24 PM

The Download Doesn't Work :( it Tells Me Im Or It Is Blocked :S (WTF?!) Could You Check The Download?
Hey! This isn't my house! What am I doing here?!

#7 Carnage_

Carnage_

    Venato Mafia Bodyguard

  • Members
  • PipPip
  • 221 posts
  • Russian Federation 

Posted 02 May 2007 - 05:44 PM

I got that:






Access to Sphosting.com has been disabled

Access to Sphosting.com has been disabled because:

• You did something you were not meant to or there was an error.
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Join best Grand Theft Auto community GTAChat.co.nr
Upgraded to IPB v2.1 Running Gang System Now!GTA Chat Website Updated!

LAD aka Franco_Forelli aka Carnage_




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users