Jump to content



Photo
* * * * * 1 votes

VC-MP: Making my own Server


  • Please log in to reply
7 replies to this topic

#1 notactiveanymore-deleteplz

notactiveanymore-deleteplz

    Nobody Special

  • Members
  • 2 posts
  • No Flag 

Posted 18 July 2008 - 03:42 PM

Sup y'all,

I'm currently making my own server for VC-MP, but i got some questions;

How can i add my own commands to the server?
Commands like /help, /commands, /register or carspawn commands

How can i add my own text to the server?
Like if someone joins my server, it says "Welcome to my server!" or something.

When i put my server online, it's only for the people that are on my router. How can i make it that people from over the whole world can join my server?


Thanks for the help :yup: ,


TroniX. :hi:


Posted Image
^Brush by Sipher900^


#2 Heckstorm

Heckstorm

    Nobody Special

  • Members
  • 1 posts
  • Kuwait 

Posted 27 November 2008 - 01:13 PM

Hi there.
I've been always asking these questions to myself, and I got the answers. So now I'm ready to help others find the answers!

How can i add my own commands to the server?
First of all, go to your server folder and there should be something called "config". Go in it and find something called:
; -- IT'S MANDATORY THAT YOU SET THE ADMIN PASSWORD!
; THE SERVER WILL NOT START WITHOUT A VALID PASSWORD.

AdminPassword = "invalid"

Change the "invalid" to any password you like (example: "bestofthebest"

Then download the GUS (General Used Scripts) in here:
General Used Scripts
and extract it to the folder. After that, go in the folder and go inside something called "vcmp" (not vcmp.cmdlevels or any others, just vcmp) and this should appear:
[MAIN]
IP=123.123.123.123
RPORT=5315
CPORT=5192
PASSWORD=rconadminpasshereblablablblaala

Change it to this:

IP=127.0.0.1
RPORT=5315
CPORT=5192
PASSWORD=bestofthebest

(Note: the PASSWORD should be the adminpassword in your server.

Then open your server (at vcmp-svr), open mirc (at the folder where you extracted the GUS) and press countinue when it appears.

(Note: It may take 5 seconds before the countinue appears.)

Press "connect" (or just wait for a few seconds) and...
walla! Go to your server, type !commands (a few times) and there you are! Server with scripts!
(Note: when you're at the server with the scripts, register and type !set admin. This will set your level to 10.)

How can i add my own text to the server?
This will already be appeared in your server withing the scripts. To edit it, go in the mirc, press countinue, and find a button which is called "Scripts Editor". Once you find it, go to a tab called "Remote", press "Edit" and in it press "Find". Type the fallowing words in the "Find":

vcmp.announce %id WELCOME $iif($vcmp.alias($vcmp.ip($1)),BACK) TO THE SERVER!

Edit the "WELCOME BACK TO THE SERVER" to anything you like, and it should appear once you enter the server.

(Remember: When you edit something, press OK in the bottom of it, and "connect" again, then enter your server).

When i put my server online, it's only for the people that are on my router. How can i make it that people from over the whole world can join my server?

You have to pay to get it world wide. Actually, I still don't know to add my server world wide, but you have to go to here and explore the place before you add your server.

And there you go!

#3 Mandeep

Mandeep

    Nobody Special

  • Members
  • 2 posts
  • India 

Posted 02 January 2009 - 12:45 PM

How to make free servers for GTA VC MP!

:bashhead:



#4 DT-boy

DT-boy

    Pickpocket

  • Validating
  • Pip
  • 37 posts
  • Hungary 

Posted 09 January 2009 - 04:21 PM

Link is broken.
I rulez so much :D :D :D
SPAM SPAM!! SPAM SPAM!!! !!SPAM%!!!!''111!!!++!!+344

#5 ahmedelnaggar

ahmedelnaggar

    Nobody Special

  • Members
  • 1 posts
  • Egypt 

Posted 08 April 2010 - 11:33 AM

Hi there.
I've been always asking these questions to myself, and I got the answers. So now I'm ready to help others find the answers!

How can i add my own commands to the server?
First of all, go to your server folder and there should be something called "config". Go in it and find something called:
; -- IT'S MANDATORY THAT YOU SET THE ADMIN PASSWORD!
; THE SERVER WILL NOT START WITHOUT A VALID PASSWORD.

AdminPassword = "invalid"

Change the "invalid" to any password you like (example: "bestofthebest"

Then download the GUS (General Used Scripts) in here:
General Used Scripts
and extract it to the folder. After that, go in the folder and go inside something called "vcmp" (not vcmp.cmdlevels or any others, just vcmp) and this should appear:
[MAIN]
IP=123.123.123.123
RPORT=5315
CPORT=5192
PASSWORD=rconadminpasshereblablablblaala

Change it to this:

IP=127.0.0.1
RPORT=5315
CPORT=5192
PASSWORD=bestofthebest

(Note: the PASSWORD should be the adminpassword in your server.

Then open your server (at vcmp-svr), open mirc (at the folder where you extracted the GUS) and press countinue when it appears.

(Note: It may take 5 seconds before the countinue appears.)

Press "connect" (or just wait for a few seconds) and...
walla! Go to your server, type !commands (a few times) and there you are! Server with scripts!
(Note: when you're at the server with the scripts, register and type !set admin. This will set your level to 10.)

How can i add my own text to the server?
This will already be appeared in your server withing the scripts. To edit it, go in the mirc, press countinue, and find a button which is called "Scripts Editor". Once you find it, go to a tab called "Remote", press "Edit" and in it press "Find". Type the fallowing words in the "Find":

vcmp.announce %id WELCOME $iif($vcmp.alias($vcmp.ip($1)),BACK) TO THE SERVER!

Edit the "WELCOME BACK TO THE SERVER" to anything you like, and it should appear once you enter the server.

(Remember: When you edit something, press OK in the bottom of it, and "connect" again, then enter your server).

When i put my server online, it's only for the people that are on my router. How can i make it that people from over the whole world can join my server?

You have to pay to get it world wide. Actually, I still don't know to add my server world wide, but you have to go to here and explore the place before you add your server.

And there you go!



HI I DID ALL THAT BUT MY SERVER DOSENT CONNECT I WAIT NOTHING HAPPENS PLZZ HELP TY

#6 Scott.

Scott.

    I am God.

  • Members
  • PipPipPipPipPipPipPipPip
  • 2,460 posts

Posted 08 April 2010 - 05:52 PM

Hey man, I don't know much about servers on there, but I'll happily help you out with testing and stuff, just give me a PM or something if you need a hand.

#7 HitMan HeadShot

HitMan HeadShot

    Nobody Special

  • Members
  • 1 posts
  • Pakistan 

Posted 07 November 2010 - 01:32 PM

o man i m a noob :wacko: tell me where is the server folder :blush: pls

#8 MuhdNurHidayat

MuhdNurHidayat

    Nobody Special

  • Members
  • 1 posts
  • Malaysia 

Posted 14 May 2011 - 09:47 AM

Sup y'all,
I'm currently making my own server for VC-MP, but i got some questions;
How can i add my own commands to the server?
Commands like /help, /commands, /register or carspawn commands
How can i add my own text to the server?
Like if someone joins my server, it says "Welcome to my server!" or something.
When i put my server online, it's only for the people that are on my router. How can i make it that people from over the whole world can join my server?

Thanks for the help :yup: ,

TroniX. :hi:

OK..
Actually,
for these questions, I can't answer:
How can i add my own commands to the server?
How can i add my own text to the server?

BUT for this answer:
When i put my server online, it's only for the people that are on my router. How can i make it that people from over the whole world can join my server?
I CAN HELP YOU!!
it's working for me, and it's free..
YOU just have to do port forward for your server and the people from all over the world can play in your server!
that's it! PORT FORWARD!!

lol.. portforward is easy actually,
1. go to your gateway in your browser, default is 192.168.1.1 ,
2. log into your router, goto "advanced setup", goto "NAT", goto "virtual servers", click "add",
3. select your network interface, in "service name" use "custom service" and put the name "VCMP",
4. then write "Server IP Address:" with your IPv4 Address (mine is "192.168.1.2" depends on your computer)
5. then in "External Port Start" write your port for VCMP (same for "External Port End"),
6. for protocol, select "TCP/UDP", then click "apply/save".. that's it!!
7. then review it whether it is there or not..

NOTE: if you dont know your network gateway and IPv4 address, then run "cmd" and type "ipconfig" then enter!
LOOK IN THE DIALOG FOR IT..

SCREENSHOTS:
Using IPconfig in CMD:
Posted Image
Entering info in router setting page:
Posted Image
Review your port forward:
Posted Image

FOR ME, sincerely I say, using SA-MP is easier than VC-MP.. but VC-MP is more fun than SA-MP!
if you want to play VC-MP at my server, add " hidayat.no-ip.org:7755 " into your favourites and play!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users