help don't know how to get starting my modding?
#1
Posted 23 August 2006 - 01:17 PM
#2
Posted 23 August 2006 - 02:55 PM
The first one is easy, just check the mods section. Most of them tell you how to install things.
Modding the game yourself is harder. Significanlty harder. Especially if you want to change the way things look.

lolzThere is no "freedom of speech" in forums, yes you can say what you want but in the end what the mods say gos. This is not a democracy.
#3
Posted 23 August 2006 - 04:24 PM
Also don't forget to tell him that no one has explained and there are no instructions anywhere on what base options in an editor are used by all moders to be able to start moddingModding the game yourself is harder. Significanlty harder. Especially if you want to change the way things look.
Which in turn makes modding even harder to be able to do
You can't even begin to learn how to start changing the way things look unless someone explains what options get used in order to be able to start understanding it
I'm sorry but this base knowledge MUST BE EXPLAINED BY SOMEONE WHO ALREADY USES THESE OPTIONS
other than that you will be guessing for at least 6 months
#4
Posted 24 August 2006 - 10:11 AM
#6
Posted 24 August 2006 - 03:38 PM
#8
Posted 24 August 2006 - 07:09 PM
That won't do him or anyone else good I have been all over that site on every page and there is nothing there at all that explains on how to mod a .dff fileno prob. If you want to try dff modling. You'l need to go the gtamodding since there aren't any dff moders here.
BTW if there are no .dff modders here then what the hell are all these mods that were created by the people here doing up on this site for then...
My point is that if there are no .dff modders on this site then there should also be no mods hosted here made by the people that belong to this site either
If there are mods made by the people on this site then there are .dff modders here as well
Edited by tx3000, 24 August 2006 - 07:09 PM.
#10
Posted 24 August 2006 - 08:51 PM
I am helping him out more than you are by telling him not to waste his time because the information you are goiving him is not correct.I'm at least giving a littel help. Your only jacking about no tutorials for dff moding.
How are you helping someone by telling them to go somewhere for help where there is none.
all that is going to do is bring him right back to this forum and wind up asking the same kind of question
Whenever I correct one of you people with fact you get all pissy at me like I did something wrong.
Edited by tx3000, 25 August 2006 - 01:30 PM.
#11
Posted 24 August 2006 - 09:23 PM
i really want to mod cars or guns only i don't know how to get started with this the only thing what i know on modding cars is that i can change handling and speed plz help me with this
ZMODELER!
(SA SUPPORT FOR .DFF not supported in free version!)
Ya If you want to have some simple fun with it try Textures. Open up the "gta3.img" file with IMG program and export the image you want and edit it with photoshop or MS paint etc.
just ask me about texture if you want to know. I'm an expert at textures. Not modeling though. If you after that ask someone else.
CPU: AMD Phenom Quad Core 9500 2.2Ghz
MB: Biostar TA790GX A+
Ram: ULTRA 4GB 800Mhz
GPU: HD 3450 512MB
PSU: APEVIA Java 500W
Display: LCD Acer X193W (19 inch, 1440 x 900)
HDD: WD 160GB
OS: Vista Home Premium 32 Bit
Case: Thermaltake Tsunami Dream
#12
Posted 25 August 2006 - 10:30 AM
Q: how can texture the outside off the cars cuz my txd workshop doesn't see the outside of cars
Q: where can i get Zmodeller free version??
Q: how can i add my own made paintjobs
Edited by tha gta dude, 25 August 2006 - 01:06 PM.
#13
Posted 25 August 2006 - 01:54 PM
You need a program that allows .dff file supportQ: how can texture the outside off the cars cuz my txd workshop doesn't see the outside of cars
http://www.zmodeler2...s/zmodeler2.zipQ: where can i get Zmodeller free version??
BTW: The free version of ZModeler does in fact support .dff files (I have the free version and can import.dff files into it and alter them) You just need to know where to look for the registration code
I have been asking this question for at least 2 weeks and I still have yet to get an answerQ: how can i add my own made paintjobs
Edited by tx3000, 25 August 2006 - 01:57 PM.
#14
Posted 25 August 2006 - 02:31 PM
oh thanks for zmodeller too
Edited by tha gta dude, 25 August 2006 - 02:55 PM.
#15
Posted 25 August 2006 - 02:51 PM
No Problemtanks for answering the first 2 questions tx3000
BTW if you want I can give you the registration code that I used for z-modeler
I will PM it to you if you want it?
#16
Posted 25 August 2006 - 03:01 PM
No Problem
BTW if you want I can give you the registration code that I used for z-modeler
I will PM it to you if you want it?
Is Z-Modeler a pay-program? If not, he should be able to get the code himself. If it is, discussion obtaining it for free is illegal, and is not to be discussed.
And STFU about the guide. It isn't mandatory that every modder makes a guide available on how to work the program.

lolzThere is no "freedom of speech" in forums, yes you can say what you want but in the end what the mods say gos. This is not a democracy.
#17
Posted 25 August 2006 - 04:00 PM
Why are you going on about all this:
You are the only one discussing this either of these 2 things.Is Z-Modeler a pay-program? If not, he should be able to get the code himself. If it is, discussion obtaining it for free is illegal, and is not to be discussed.
I have reported you for off topic posting and purposly trying to start flame wars
Edited by tx3000, 25 August 2006 - 04:06 PM.
#18
Posted 25 August 2006 - 04:07 PM
If you have to PAY for the full version, and you are GIVING him the registration code, that is PIRACY. It's ILLEGAL you IGNORANT f***.
You haven't proven much. Except that you seem to think that we must go out of our way to cater to your needs. Oh, and just like I proved you were a hypocrite, and then you stopped responding.

lolzThere is no "freedom of speech" in forums, yes you can say what you want but in the end what the mods say gos. This is not a democracy.
#19
Posted 25 August 2006 - 04:34 PM
I knew if this went on long enough I would catch someone in this and now you have allowed me to nail you in this thus having you back up my point about copyright infringement that all of you said was perfectly fineIf you have to PAY for the full version, and you are GIVING him the registration code, that is PIRACY. It's ILLEGAL you IGNORANT f***.
I do recall everyone that responded to my copyright issue where the original files were posted on a site as well as having original files inside mods.....INCLUDING YOURSELF backing up a claim that someone replied with saying IF IT'S PAID THEN THAT GIVES ONE THE LISCENSE TO POST IT FREELY SO THEREFORE ITS NOT ILLEGAL...
And I specifically said not for people that have not paid for it and people said I was wrong about that too
.
People saying its ok to post original game files is the exact same thing as me posting a registration code.
I am going to use the exact same points you people did arguing with me about the copyright infringment issue
I didn't post the program, or any files that allow the program to run,
Whether I paid for it or not It's MY registration code (Just like those are you're mods) therefore According to everyone here I have the right the to do what I what with it...
DON'T EVEN BOTHER TRYING TO ARGUE THIS POINT
Don't even talk to me about being a hypocrite if you want to try to take the exact same situation and apply it one sided saying its ok for the site to do it but not for me to do itYou haven't proven much. Except that you seem to think that we must go out of our way to cater to your needs. Oh, and just like I proved you were a hypocrite, and then you stopped responding.
ROFLCOPTER
After this reply
I have proven you have no clue to what you are talking about and that you can't stand the fact that I have pointed out all of you're short comings and now you are embarresed about it.
Edited by tx3000, 25 August 2006 - 04:36 PM.
#20
Posted 25 August 2006 - 08:13 PM
only what do i need to do whith the regestrtion code cuz zmoddeler started emediatly after i opened the program.
now is my problem how do i need to use zmoddeler cuz i don't understand a thing off all those thing what i only need to know now is some kind of basics like adding a blueprint so i can make some nice cars\guns
and like adding some poly's i hope you now how to do this.
p.s. if you don't know why i don't reply on saturday and sunday i'm on vakation
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
















